BLXDG - 1075/1065/1090/4050/5018/5028/5046/5090/ (S

  • MSDS: BLXDG
  • Manufacturer: XEROX CORP
  • Product Name: 1075/1065/1090/4050/5018/5028/5046/5090/ (S
  • National Stock Number: 3610-00N023521
Product Identification

Product ID:1075/1065/1090/4050/5018/5028/5046/5090/ (S
MSDS Date:07/20/1988
FSC:3610
NIIN:00N023521
MSDS Number: BLXDG

Responsible Party
XEROX CORP
100 CLINTON AVE S
ROCHESTER, NY 14644-1877
US

Emergency Phone: 716-422-2177

Info Phone: 800-828-6571

Cage: 0E6G9

Contractor
XEROX CORPORATION
ROCHESTER, NY 14644-1877 US

Telephone: 800-828-6571/716-422-2177

Cage: 26921

Ingredients

POLYESTER FILM

Fraction By Weight: 65-70%


POLYCARBONATE

Fraction By Weight: 20-25%


TERTIARY DIAMINE

Fraction By Weight: 10-15%


POLYVINYL CARBAZOLE

CAS: 25067-59-8

Fraction By Weight: <5%


SELENIUM

CAS: 7782-49-2

RTECS: VS7700000

Fraction By Weight: <1%

OSHA PEL 0.2 MG/M3

ACGIH TLV: 0.2 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RAT) >5 G/KG.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WHEN USED AS INTENDED, DOES NOT
PRESENT HEALTH OR SAFETY HAZARD.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE
Medical Cond Aggravated by Exposure:NONE WHEN USED AS DESCRIBED BY
PRODUCT LITERATURE.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
WITH SOAP AND WATER. INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O*2/ARTIFICIAL RESPIRATION). CALL MD . INGEST: CALL MD
IMMEDIA TELY .

Fire Fighting

Extinguishing Media:WATER, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WHEN IN A MACHINE, TREAT AS AN ELECTRICAL
FIRE.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMPERATURES CAN RESULT
IN MELTING AND PYROLYSIS. FUMES MAY CAUSE RESPIRATORY SYMPTOMS.
DELAYED EFFECTS MAY OCCUR UP TO 72 HOURS.

Accidental Release

Spill Release Procedures:PARTICLES DETACHED THROUGH PHYSICAL DAMAGE MAY
BE DISPOSED OF AS INDICATED BELOW.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID EXPOSURE TO HIGH TEMPERATURES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED.
Ventilation:NONE REQUIRED WHEN USED AS INTENDED.
Protective Gloves:NONE REQUIRED WHEN USED AS INTENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: PHOTORECEPTOR, 1R88.

Chemical Properties

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID; ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:FLAMES, DIRECT HEAT,EXP TO HIGH
TEMPERATURES
Hazardous Decomposition Products:OXIDES OF SELENIUM.

Disposal

Waste Disposal Methods:CASUAL DISPOSAL LEADING TO INCINERATION OR
REGULAR LANDFILL ACCORDING TO LOCAL, STATE, AND FEDERAL ORDINANCES.
(PHOTORECEPTORS MUST NOT BE INCINERATED IN QUANTITIES GREATER THAN
150 LB. IN ONE HOUR AC CORDING TO NEW YORK STATE STANDARDS.)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.